AEROFOAM NBR Rubber Insulation Plain Sheet & Roll

Aerofoam® NBR Rubber Insulation Plain Sheet & Roll are closed-cell elastomeric foam structures with a non-porous composition that offers high thermal efficiency and protection from imminent condensation problems and helps as a sound absorber.

Depending on the requirements of the market, this product can be coated with different types of foils and have a factory-applied self-adhesive backing.

The installation time is reduced by more than 40% due to the ease in cutting as well as quick adhesion of the material.

Applications
Big diameter pipes (where tubes can’t be used)
Ventilation ducts
Tanks, reservoirs
Engine rooms (as sound attenuates)
Fittings (valves, flanges, bends)

Properties
Fire rated “CLASS O” as per BS 476 Parts 6 & 7;
Very low water vapor permeance (0 perms);
High water vapor diffusion factor (> 17,000);
Very low water absorption rate (0.06% by volume);
High thermal efficiency (λ24˚ C = 0.033 W/mK; λ46˚ C = 0.035 W/mK);
Wide temperature range (from -50˚ C to +105˚ C);
Chemical resistance – resistant to most chemicals (sodium, silica, fluoride, chloride, etc.);
Antibacterial & antifungal;
Environmental friendly – ODP = 0 and GWP < 5;
Very low VOC emission level ( < 6 µg/m2/hr in 24 hours);
Sound absorption properties;
Easy and fast to install.

Not only are they environmentally friendly, but they also pose no harm to human health, it has zero Ozone Depletion Potential (ODP), Global Warming Potential (GWP) of less than five, and a low Volatile Organic Compound (VOC) of less than 6 µg/m2/hr in 24 hours.  Aerofoam® NBR Rolls and Sheets comply with LEED requirements.