METALCLAD SPEEDALLOY MECHNICAL REPAIRS

Compare

METALCLAD SpeedAlloy is a quick curing, 100% solids, polymeric ‘leak stopper’ used for making fast, effective repairs to equipment which must be returned to service almost immediately.

THE LEAK STOPPER – AND MORE!

The First Choice for Fast, Reliable Mechanical Repairs.

Available in unique, convenient ENECON® ‘A – Packs.’

METALCLAD SpeedAlloy is a quick curing, 100% solids, polymeric ‘leak stopper’ used for making fast, effective repairs to equipment which must be returned to service almost immediately.

METALCLAD SpeedAlloy has a paste consistency when first mixed then transforms into a metal-hard composite in just minutes.

  • Quick Curing
  • Trowelable
  • Requires No Heat
  • Unlimited Shelf Life
  • 100% Solids
  • Safe & Simple To Use

Use on…

  • Pipes & Tanks
  • Sumps
  • Radiators & Fuel tanks
  • Cracked & holed casings
  • Damaged keyways
  • Stripped threads
  • Scored shafts
  • Hydraulic rams

Technical Data

Volume capacity per 167gm “A Pack”
4.3 in3 / 72 cc
Mixed density
0.085 lbs per in3 / 2.33 gm per cc
Coverage rate per “A Pack” @ 0.25 in / 6mm
17.2 in2 / 0.012 m2
Shelf life
Indefinite
Volume Solids
100%
Mixing ratio Base Activator
By Volume 1 1
By Weight 2 1

Working Life and Cure Times

Ambient Temperature Working Life Machining Light Load Full Mechanical Chemical Immersion
41°F 5°C 10 min. 60 min. 2 hrs. 72 hrs.
59°F 15°C 7 min. 45 min. 1 hrs. 48 hrs.
77°F 25°C 5 min. 30 min. 40 min. 36 hrs.
86°F 30°C 3 min. 20 min. 30 min. 24 hrs.

Physical Properties

Typical Values Test Method
Compressive strength 22,500 psi 1575 kg/cm2 ASTM D-695
Flexural strength 8,500 psi 595 kg/cm2 ASTM D-790
Izod impact strength 1.3 ft lbs/in 0.69 j/cm ASTM D-256
Hardness – Rockwell R-90 ASTM D-785
Hardness – Shore D 84 ASTM D-2240
Tensile Shear Adhesion
Steel 2300 psi 161 kg/cm2 ASTM D-1002
Aluminum 2100 psi 147 kg/cm2 ASTM D-1002
Copper 2250 psi 158 kg/cm2 ASTM D-1002
Stainless Steel 1800 psi 126 kg/cm2 ASTM D-1002
Surface resistivity 1 x 1015 ohms ASTM D-257
Volume resistivity 1 x 1015 ohm/cm ASTM D-257
Dielectric constant 7.5 ASTM D-150

Chemical Resistance

Acetic acid (0-10%) EX Methyl alcohol G
Acetic acid (10-20%) G Methyl ethyl ketone G
Acetone G Nitric acid (0-10%) EX
Aviation fuel EX Nitric acid (10-20%) G
Butyl alcohol EX Phosphoric acid (0-5%) EX
Calcium chloride EX Phosphoric acid (5-10%) G
Crude oil EX Potassium chloride EX
Diesel fuel EX Propyl alcohol EX
Ethyl alcohol G Sodium chloride EX
Gasoline EX Sodium hydroxide EX
Heptane EX Sulfuric acid (0-10%) EX
Hydrochloric acid (0-10%) EX Sulfuric acid (10-20%) G
Hydrochloric acid (10-20%) G Toluene G
Kerosene EX Xylene EX

EX – Suitable for most applications including immersion
G – Suitable for intermittent contact, splashes, etc.

Brand

METALCLAD

Manufacture Model No.

SPEEDALLOY

Origin

USA

Reviews

There are no reviews yet.

Be the first to review “METALCLAD SPEEDALLOY MECHNICAL REPAIRS”

Your email address will not be published. Required fields are marked *